GEOX Engineering has performed several works for ScottishPower Renewables including multi-faceted drivetrain and blade bearing inspection & analyses. Their work had always been delivered to a high standard and has provided valuable insights into wind turbine component conditions which have subsequently helped inform our operational and maintenance decisions.
Solutions
Supporting remedial consultation led by careful metrics and proven industry experience & knowledge. We consistently update our best practices ensuring the best technology and effective processes are used every service through research & development, extensive field trials, continued study and qualifications.
Independent Inspections
GEOX Engineering Ltd prides itself on providing market leading & bespoke independent inspections to the Wind & greater Renewables industry, although not limited to this industry sector, our current catchment area is UK, Ireland & EU.
Our provision of technical inspections tailored to our client’s needs such as:
- Commissioning / Post Construction
- End of Warranty / End of Contract
- Life Extension / Extended Life / End of Life
- Pre-acquisition
- Insurance needs
- Structural Integrity / FOS (factor of safety)
- Main Component failure investigations
- Main Component ‘fit for service’ investigations
- High level Visual Audits (walkdown)
- O&M quality /provision
- Drive Train Analysis
- Gearbox Analysis
- Generator Analysis
- Bearing(s) Analysis
- RUL (remaining useful life) assessment
- RCA (root cause analysis)
We use technology and methodology such as:
- Bearing/lubrication Ultrasound Analysis
- Vibration analysis (rotor imbalance/transmission alignment)
- Laser shaft/coupling alignment checks (transmission)
- Borescope verification (Gearbox/Bearings)
- 3-axis gyroscope motion sensor measurements (blade bearings)
- Tilt/axial reduction measurements (blade bearings)
- Radial/axial run-out measurements (blade/main/yaw bearings)
- Thermal surveys/infra-red (drive train/control cabinets/convertor/cabling/transformer)
- De-energised testing (generators/motors)
- NDT (UT/PAUT)
- Ultrasonic bolt tension/defect monitoring
- UT corrosion mapping/monitoring
- Concrete resistivity measurements
- Foundation ground penetrating radar
- Independent lubricant analysis/re-evaluation
- Blade set angle checks
- Blade condition assessment (ground based camera)
- High level visual auditing (turbine/OEM/component specific)
Bespoke Correctives
GEOX Engineering Ltd prides itself on providing bespoke correctives to the Wind & greater Renewables industry, although not limited to this industry sector, our current catchment area is UK, Ireland & EU.
Our provision of bespoke correctives tailored to our client’s needs such as:
- Laser shaft/coupling alignment correctives (transmission/generator)
- Generator bearing exchange (up tower)
- Gearbox torque reaction arm support exchange (bearings/springs/subcomponents)
- Auto lubrication unit exchange/repair
- Bolt exchange (tower/mainframe/hub/blade bearing/blade)
- Seal exchange (blade bearing/main bearing)
- Welding repairs up tower (main frame/rotor locking plate)
- Minor Gearbox repairs up tower (bearings/shims)
- Gearbox oil exchange
- Paint repairs (tower/flanges/nacelle/hub)
- Joint seal/shim exchange/repair (tower flanges)
- Blade set angle correctives
PREVENTIVE MAINTENANCE
GEOX Engineering Ltd prides itself on providing precise preventive maintenance to the Wind & greater Renewables industry, although not limited to this industry sector, our current catchment area is UK, Ireland & EU.
Our provision of precise preventive maintenance tailored to our client’s needs such as:
- Purge/flush/replenish bearing lubricants (blade bearing/main bearings/generator bearings/yaw bearings)
- Seal re-conditioning (blade bearings/main bearings/gearbox)
- Electrically insulated bearing installation (generators)
- Re-termination cable repair (generators)
- Yaw gearing lubricant removal/replenish
- Yaw PETP bearing exchange
- Transmission exchange/lubrication
- Desiccant breather installation (gearbox)
- Oil exchange (gearbox/hydraulic)
- Torque/re-tension bolt/joints (tower/hub/blade bearings/blade)
- Pitch end-stop sensor recalibration.
Benefits of preventive maintenance:
Extends asset life, (RUL) remaining useful life
Reduces maintenance (planned and unplanned).
Boosts productivity
Reduces unplanned downtime and optimize production
Reduce dangerous malfunctions
What Our
Clients Say
Since 2018, George and the team at GEOX has provided technically sound and cost effect inspection services to 30 aging Vestas V4X turbines that are Asset Managed by BVG Associates (BVGA). As part of supporting the owners’ journey to life-extend these assets, we engaged GEOX to carry out walk down inspections as well as more detailed drive train condition analysis. Those inspections helped inform plans and associated budgets for ongoing proactive inspections and component replacements necessary to continue operating the assets beyond 20 years. GEOX continue to provide a cost-effective proactive inspection service as well as where necessary reactive inspections and repairs.
In addition, we trust GEOX to be an independent set of eyes and ears to monitor the quality of service provided by the incumbent O&M provider. Only once in the last five years have we had to go to an alternative supplier for inspection services. GEOX continue to be our “go to” for inspection services and associated technical wisdom.
GEOX Engineering completed a comprehensive analysis and independent gearbox inspection on a 30T critical plant crane for one of our important customers. George and the team not only provided a highly professional job but also a 3-step solution for the customer. GEOX provided quality evidence and verification to support target safety levels for extended operation of the crane could no longer be maintained. Would highly recommend to companies needing market leading independent critical plant inspections.
We have worked with Geox for several years now and they have always provided excellent, professional work and reports. Highly recommend them to anyone who needs specialised major component analysis.